Konfigurasi Modem Prolink PHS100 + IM2 (GSM) card Ubuntu Manual (Wvdial)

Library yang dibutuhkan yaitu :

1. Wvdial (klik link ini)
2. usb-modeswitch
   >> http://packages.ubuntu.com

Konfigurasi :

• Pastikan modem telah terpasang pada port USB.
• Edit file “wvdial.conf”.

root@riyaniezt:~# gedit /etc/wvdial.conf

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Baud = 9600
New PPPD = yes
Modem = /dev/ttyUSB2
ISDN = 0
; Phone = Target-Number-Phone
; Password = Your-Password
; Username = Your-Login-Name

Ubah menjadi :

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","APN"
Modem Type = Analog Modem
Baud = 9600
New PPPD = yes
Modem = /dev/ttyUSB2
ISDN = 0
Phone = phone-Operator-Anda
Password = password-Operator-Anda
Username = username-Operator-Anda

Keterangan :

• APN adalah APN dari operator yang kita gunakan misal : indosatm2 (IM2), indosatgprs (IM3).
• Phone adalah phone dari operator yang kita gunakan misal : *99# (IM2)

• Konfigurasi ulang wvdial, untuk melakukan konfigurasi otomatis keberadaan port usb yang digunakan untuk modem dengan :

root@riyaniezt:~# wvdialconf 
Editing `/etc/wvdial.conf'.

Scanning your serial ports for a modem.

ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1   S2   S3   
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 9600 baud
ttyUSB1<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
WvModem<*1>: Cannot get information for serial port.
ttyUSB2<*1>: ATQ0 V1 E1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 Z -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyUSB2<*1>: Modem Identifier: ATI -- Manufacturer: PROLINK
ttyUSB2<*1>: Speed 9600: AT -- OK
ttyUSB2<*1>: Max speed is 9600; that should be safe.
ttyUSB2<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK

Found a modem on /dev/ttyUSB2.
Modem configuration written to /etc/wvdial.conf.
ttyUSB2: Speed 9600; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
root@riyaniezt:~#

• Mulai berselancar ria (connect) dengan :

root@riyaniezt:~# wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","indosatm2"
AT+CGDCONT=1,"IP","indosatm2"
OK
--> Modem initialized.
--> Sending: ATDT*99#
--> Waiting for carrier.
ATDT*99#
CONNECT
--> Carrier detected.  Waiting for prompt.
--> Don't know what to do!  Starting pppd and hoping for the best.
--> Starting pppd at Wed Nov 17 11:56:30 2010
--> Pid of pppd: 10850
--> Using interface ppp0
--> pppd: (�[12] @�[12]  �[12] 
--> pppd: (�[12] @�[12]  �[12] 
--> pppd: (�[12] @�[12]  �[12] 
--> pppd: (�[12] @�[12]  �[12] 
--> pppd: (